阳离子聚合合成聚苯乙烯大分子单体

<正> 近十年来,对大分子单体的合成和表征进行了较广泛的研究,其中尤以聚苯乙烯大分子单体研究得更多。Milkovich等用阴离子聚合合成了一系列具有不同端基的大分子单体。本文采用实验要求比阴离子简单的阳离子聚合方法,用对-氯甲基-β-溴乙苯和三     

An Abietane Diterpene and a Sterol from Fungus Phettinus igniarius

A new abietane diterpene 12-hydroxy-7-oxo-5, 8, 11, 13-tetraene-18, 6-abietanolide, together with a new natural sterol stigmasta-7, 22-diene-3β, 5α, 6α-triol have been isolated from the fruiting body of the fungus Phellinus igniarius. Their structures were elucidated by spectroscopic methods including 2D NMR techniques.     

反胶束模板制备聚甲基丙烯酸甲酯/无机纳米粒子/石墨纳米复合材料及其表征

以甲基丙烯酸甲酯(MMA)和三氯甲烷(CHCl₃)为油相制备反胶束微乳液, 依靠表面活性剂十六烷基三甲基溴化铵(CTAB)自组装形成的“微反应器”作为模板成功地制备了PMMA/Eu(OH)₃/EG和PMMA/Ni(OH)₂/EG纳米复合材料. 并用红外光谱(IR)、扫描电镜(SEM)、透射电镜(TEM)、X射线衍射(XRD)和差热-热重(TG-DTA)对该复合材料进行了表征和分析. 研究结果表明, 反胶束法可以有效地应用于有机-无机纳米复合材料的制备.     

毛细管电泳及芯片毛细管电泳的电容耦合非接触电导检测

综述了毛细管电泳(CE)及芯片毛细管电泳(MCE)的电容耦合非接触电导检测(Capacitively Coupled Contactless Conductivity detection,C4D)的研究状况;并分别对其装置、检测的影响因素及其应用进行了评述。引用文献81篇。     

A New Amperometric Glucose Biosensor with Naphthol Green B as Mediator

Naphthol green B was used, for the first time, as a new mediator in an amperometric glucose biosensor. It is a good mediator, promoting electron transfer from glucose oxidase to graphite electrode. The biosensor shows high sensitivity to glucose at low potential with response time of 30 seconds. The linear range is from 1.5 to 18μmol/L glucose with detection limit of 0.5μmol/L glucose.     

Photophysics properties of 4-formacyl-triphenylamine and 4,4''''-bisformacyl-triphenylamine

The photophysical processes of 4-formacyl-triphenylamine (FTA) and 4,4'-bisformacyl-triphenyl-amine (BTA) have been studied. The fluorescences of FTA and BTA with donor (triamine) and acceptor (formacyl) moieties show the twisted intramolecular charge transfer (TICT) emission in polar solvents and photoinduced charge transfer (ICT) emission in nonpolar solvents. These could be supported by the solvent effect, temperature effect and the quenching process by strong electron-deficient compounds.     

X-射线衍射法测定尼龙1010结晶度

根据X-射线散射强度理论,使用图解多重峰方法对尼龙1010三个结晶峰及非晶峰的衍射强度进行校正,首次导出了尼龙1010结晶度计算公式,所得结果与密度及量热测定结果具有很好可比性。     

氧化羰化法合成碳酸甲乙酯热力学及催化性能的研究

研究了在甲醇、乙醇温和溶液中,氧化羰化一步合成不对称碳酸甲乙酯(MEC)反应。通过热力学计算考察了反应的可行性及程度。计算结果表明,在298.2K下主反应平衡常数为2.39×1080,说明此反应的可行性和程度均很大。实验发现在氧化羰化合成碳酸甲乙酯的过程中,不仅存在氧化羰化过程,同时也存在酯交换过程;含氮席夫碱(Schiff)的种类,甲醇和乙醇相对用量,反应温度和压力对碳酸甲乙酯(MEC)的合成均有影响。当以氯化亚铜(CuCl) 1,10 菲罗啉(phen) N 甲基咪唑(NMI)为催化剂时,摩尔比n(CuCl)∶n(NMI)∶n(phen)=1∶1.25∶1.25,在393K,2.4MPa,VMeOH∶VEtOH=2∶8,CuCl浓度为0.20mol L的条件下,反应2h,甲醇的转化率为44.3%,乙醇的转化率为22.3%,MEC产率为10.4%。与单纯CuCl催化剂相比,甲醇和乙醇的转化率分别提高17倍和9倍,MEC产率提高74倍。对氧化羰化反应机理也进行了探讨。     

咪唑类化合物-CuCl络合催化剂在甲醇氧化羰基化反应中的催化性能

研究了咪唑及其衍生物配合CuCl对甲醇液相氧化羰化合成碳酸二甲酯的催化性能。筛选出溶解性好、腐蚀性小且催化活性高的多功能助催剂。实验结果表明，反应体系中加入N-甲基咪唑后，CuCl可以完全溶解。当催化剂的浓度为0.2 mol/L, N-甲基咪唑与CuCl的量为4∶1，反应温度为120 ℃，反应压力为2.40 MPa，CO与O2的进气比2∶1，反应3 h的条件下甲醇的摩尔转化率为15.4%，选择性为98%以上。从腐蚀性试验结果看，50 ℃时，加入N-甲基咪唑化合物后，Q235钢在CuCl/CH3OH/H2O/CO/O2体系中的腐蚀速率为0.22mm/a，缓蚀效率为94.5%。动力学研究表明，反应近似为一级，加入N-甲基咪唑后，反应速率常数为0.15 min－1。     

Study on the Intramolecular Hydrogen Bonds of Dibenzofurans, Xanthones and Anthraquinones with One or Two Positions Substituted by Hydroxyls

<正>The thermodynamic properties of dibenzofurans (DFs), xanthones (XTs) and an- thraquinones (AQs) with one and two positions substituted with hydroxyls in the ideal gas state at 298.15 K and 1.013×10~5 pa were calculated at the B3LYP/6-311G~* level using Gaussian 03 program. The isodesmic reactions were designed to calculate the standard free energy of formation (Δ_fG~e). Three types of hydrogen bonds exist in the three kinds of chemicals and their bond energies were ascertained as 7-15, 15-23 and 49-58 kJ·mol~(-1) respectively by comparing the Δ_fG~e values. Electronic density topology analysis was applied to validate the strength of bond.